Video Spotlight
Mirror Wall: Climbing Greenland's Biggest Face - First Look Teaser
Mirror Wall: Climbing Greenland's Biggest Face - First Look Teaser
Whipper of the Month
Weekend Whipper: Trad Dyno Attempt at Fair Head, Northern Ireland
Weekend Whipper: Trad Dyno Attempt at Fair Head, Northern Ireland

Belaying an XL - Tips for Lightweight Climbers

By Kitty Calhoun

A 5-foot 6-inch person can belay a 6-footer just fine and dandy, and vice versa.I swung my brake hand hard against my hip and flew 20 feet up to an ice screw. A fall by Peter Athans, 185 pounds of muscle, through space off the famous Fang ice climb in Vail, Colorado, ripped the belay anchor. At 115 pounds, I launched into the air.

Pete’s top screw failed, the next one caught, the forces equalized, and he and I came to rest hanging like clicker-clackers off one bent screw. Although he had fallen about 30 feet, he was fortunately unharmed.

This was one of the most dramatic belays I have experienced and illustrated the effect of a heavier leader falling and being caught by a lighter belayer.

Over the last 35 years of climbing and guiding, I’ve belayed innumerable partners who outweighed me, and along the way learned a few tricks both to help me catch them and feel confident belaying them.



1. Consider using a brake–assisted device. These clamp the rope when there is a sudden pull, such as a lead fall, minimizing the risk of dropping a leader and making it easier for you to hold a leader who is working a route. Read all directions for using each type!

2. A new device, the Edelrid Ohm, looks promising in that it is designed to reduce the force placed on a belayer catching a lead fall. The leader places the Ohm on the clipping end of the first draw on a sport route, and the friction device reportedly absorbs 50 percent of the fall force.

3. Stand in a braced position next to the cliff. If you are belaying away from the base and are not anchored, you may be yanked or dragged toward the cliff, increasing the length of the lead fall. The farther out you are, the greater the chance that you will reflexively let go of the belay to grab something to stop your slide. You could also, potentially, slam into the cliff and lose control of the belay.

4. In certain cases, such as when ice climbing or at a cliff with loose rock, belay off to the side, where you can’t be struck by falling ice or rock. When you do belay to the side, anchor in so you can’t be pulled into the path of falling debris. Also make sure the leader has a multi- directional piece as his or her first protection. When you anchor to the side, the angle of the rope will pull sideways on the first piece of pro, possibly lifting it out if it isn’t multidirectional.

5. Understand the concept of a soft catch, and prepare for your own experience of it as a light person. On sport routes the belayer is often expected to jump up (never give out slack, a method used by some) when a leader falls, especially if the belayer is using a M brake-assisted device or the leader weighs a lot less than the belayer. CM As a lighter belayer, you won’t need to worry about jumping to soften the catch—your heavier leader will naturally catapult you skyward. When you are lifted, put your feet up and forward on the wall to keep your body away from it, and watch that your belay device doesn’t slam into the first piece of pro and jam open.

6. Wear belay gloves, especially with a heavier climber or skinnier rope or in wet or icy conditions, to protect against rope burns.

7. Wear a helmet to protect your noggin, especially if there is loose rock or ice.


KITTY CALHOUN is a professional guide and co-owner of Chicks Climbing and Skiing. She lives and climbs in Castle Valley, Utah.


This article originally appeared in Rock and Ice issue 238 (November 2016).

Reader's Commentary:

Don't want to use Facebook, but still want to comment? We have you covered:

Add Your Comments to this article: